|
Range Tribune HE Pre-plumb Cylinder 300 Litres
Save time and money with Tribune HE Systemfit, plug-in and pre-plumbed units
The Ultimate plug-in, Pre-Plumbed Solution
Tribune HE is available in a highly popular plug-in, pre-plumbed format - designed to significantly reduce the installation time. The units are factory assembled and are both pre-plumbed and pre-wired with 230V central heating controls, a pump, two 2-port motorised valves, automatic bypass and a balancing valve. All units are also supplied with programmer, room stat and both a central heating & hot water expansion vessel pack.
This pre-plumbed Tribune HE System will not only speed up the installation process, but will also increase the quality and integrity of the central heating system. This results in an elimination of costly call-backs.
Connections
1. 22mm hot water draw
2. Cold Water Inlet
3. Temperature Relief Valve
4. Cold Feed Drain Elbow
5. Immersion Heater 3kW
6. Twin Thermostat
7. Flow from Boiler
8. Circulating pump
9. 22mm Central Heating 2 port valve
10. Filling Loop Flexible Hose
11. Bottle Air Eliminator
12. 22mm DHW 2 Port valve/safety valve
13. Heating circuit drain elbow
14. 22mm Balancing valve (Lockshield)
15. 22mm Return from radiator circuit
16. 22mm Return to boiler
17. 22mm Automatic by-pass valve
18. Wiring Centre
19. Tundish
• Plug-in sockets
|
Code |
Capacity |
Height |
Diameter |
Weight |
Weight |
|
|
|
|
|
(Kg-empty) |
(Kg - full) |
|
|
|
|
|
|
|
|
TI120P |
120 L |
906 |
550 |
45 |
165 |
|
TI150P |
150 L |
1093 |
550 |
50 |
200 |
|
TI180P |
180 L |
1281 |
550 |
55 |
235 |
|
TI210P |
210 L |
1496 |
550 |
60 |
270 |
|
TI250P |
250 L |
1719 |
550 |
65 |
315 |
|
TI300P |
300 L |
2032 |
550 |
70 |
370 |
|
