0844 504 2535 | Welcome, Guest Login | View Cart
Cart (0) | £0
RM Unvented Stelflow Indirect Stainless Steel Hot Water Cylinder - 180 Litre
RM Unvented Stelflow Indirect Stainless Steel Hot Water Cylinder - 180 Litre

RM Unvented Stelflow Indirect Stainless Steel Hot Water Cylinder - 180 Litre

Your Price: £1,173.56
Retail Price:£1,400.00
Your Savings:£226.44(16%)
Part Number:180I

Feature:

3Person

Feature 5

Bedrooms:5, Bathrooms: 1, Shower Rooms:2
The RM Stelflow has been carefully constructed using quality components and designed with performance in mind. Using our many years of experience within the hot water industry and our knowledge of bringing Unvented cylinders to the market we have created a new standard in Unvented water storage.

The Stelflow Indirect is the mainstay of the RM catalogue. Installed time and time again the unit is a competent and reliable companion for any standard boiler. The high efficiency, quick recovery coils make this cylinder perfect for even the busiest homes, ensuring long lasting hot water stores in a unit that has been built to last.

Stelflow Cylinder Is Supplied With The Following:
  • Cold Water Inlet Set
  • Tundish
  • T&P Relief Valve
  • Expansion Vessel
  • 3kW Immersion
  • 2 Port Zone Valve
  • Dual Thermostat
Stelflow Offers The Following Advantages:
  • Specially made units manufactured to your own design.
  • Full range of slim units available, 60L to 210L, featuring a diameter of only 475mm, one of the slimmest on the market.
  • A range of Horizontal cased units.
  • Coil in coil heat exchanger, giving high recovery rates.
  • External expansion for reliability and flexible siting.
  • Full WRAS product approval.
  • Vessel constructed from Duplex Stainless Steel.
  • Superior insulation values, with an ODP of 0 and GWP of 1.
  • Comprehensive controls and fixing kit from leading manufacturers.
Stelflow offers peace of mind with the following guarantees:
  • 25 Year vessel guarantee / 5 Years on large unvented units.
  • Integral stainless steel stat pocket guaranteed against corrosion.
  • All other cylinder components guaranteed for 2 years.
  • All units are pickled to ensure longer life.
Stelflow offers many technical benefits:
  • Minimum recommended working pressure 1 bar & max 3 bar.
  • All cylinder connections are 22mm compression
  • Minimum water supply 1.5 Bar, 20 Litres/Min
  • Primary coil circuit must be fully pumped, gravity coils are available by special order.
  • All units available as vented cylinders.
  • Control settings: 1. Pressure reducing valve set at 3 Bar. 2. Expansion Relief Valve set at 6 Bar. 3. Temperature and pressure relief valve at 7 bar and 90oC. 4. Hight Limit stat set at 85oC.
Made In Stainless...

RM Cylinders manufacture all our Unvented units using Duplex Stainless Steel where other companies may use lesser grades of Steel.

Duplex has been chosen due to its substantially higher tensile strength, allowing units to be produced using thinner walls in relation to other materials, which results in a lighter unit.

Traditional methods worldwide produce products using mild steel with a vitreous enamel lining, this construction maybe on offer in the uk as a cheaper alternative but result in a heavier product with a more stringent servicing regime and a generally shorter lifespan.

There are many grades of Stainless Steel on offer in the market with varying degrees of corrosion resistance. RM manufacture the shell using only Duplex 2304 Stainless Steel and 316L for coils & bosses, this is seen as a far superior grade, and together with our modern manufacturing process allows us to offer the long guarantees the market has come to expect from our Stelflow range of cylinders.

This mix of Duplex and Austenitic Steels are considered to be the ideal group of metals for hot water tanks, having good fabrication qualities, strength, and excellent resistance to stress and corrosion.

Material however is not the full story. Having the best material is just the start, knowing what to do with the material is equally as important, which is why we have a butt joined assembly with no overlapping, eliminating crevices.

When welding our cylinders a backing gas is used to ensure deep welding penetration and a clean internal weld. If the weld is not clean or crevices are present then this may encourage corrosion and weaknesses within the product.

Once the welding process has been completed the cylinder is pickled and passivated , this involves coating all internal surfaces of the cylinder with a solution followed by flushing the cylinder out with water. This process restores the passive film to all welded areas providing protection against premature corrosion, and giving the unit its long guarantee.

Corrosion Advice:
Even when using stainless steel vessels, corrosion can still be an issue. This can occur when units are connected to a private supply, wells or where the water has a high concentration of Chlorine (CI) in excess of 200PPM. It is the responsibility of the installer to establish the water and supply type before installations takes place. In cases where the water is found to be outside these parameters additional protection against corrosion will be required. To combat this issue, RM can supply a Stainless steel vessel with a built-in electrical anode, which must be specified at the time of order as a unit cannot be upgraded. Failure to follow these guidelines will invalidate the product guarantee if the unit fails due to corrosion.