|
Ariston Classico Indirect Floor Standing STI 150 Hot Water Cylinder
The long proven Classico unvented cylinders share many benefits with the Primo range, but instead of a stainless steel tank they feature a quality steel tank that is lined internally with an exclusive type of vitreous enamel coating. A magnesium anode protects against corrosion and the environmentally sound thermal tank insulation is also highly efficient against standing heat loss.
- Quality steel tank, 12 bar pressure tested and exclusive vitreous enamel coating (glass lining)
- Environmentally sound and highly efficient thermal insulation
- Compact design - Slimmest on the market
- All plumbing and electrical connections within a 90 degree angle
- Magnesium anode to protect against corrosion
- Immersion heater supplied with regulation thermostat and dual pole thermal cut-out
Floor standing mains pressure hot water storage cylinders for use with a gas a oil boiler
150 l capacity, 3 kW power, floor standing
Using Ariston's advanced technology and unique manufacturing techniques the Classico offers copious amounts of hot water at mains pressure. All Classico models offer fast reheat times, use the minimum amount of valuable floor space and feature a magnesium anode for added protection. The Classico is ideal for domestic use.
Guarantee:
5 year tank (2 year guarantee on electrical components).
|
Main Technical Information |
|
Capacity |
l |
150 |
|
Voltage |
V |
240 single phase |
|
Power |
kW |
3 |
|
Heigth |
mm |
1155 |
|
Width |
mm |
505 |
|
Depth |
mm |
505 |
|
Characteristics |
Cylinder thermostat Ability to adjust the domestic hot water temperature range via the indirect heat source. |
Steel tank The storage tank is constructed from high quality steel for high pressure operation. |
Secondary return connection Allows the re-circulation of domestic hot water via a suitable pump and thermostatic control to give instant delivery at the hot water outlet. |
|
Temperature regulation Ability to adjust the domestic hot water temperature range. |
High quality enamel coating The steel tank is coated with vitreous (glass) enamel making it both corrosion resistant and hygienic. |
High efficiency indirect coil The large surface area of the indirect coil provides super fast reheat times. |
|
|
Characteristics |
-
Quality steel tank, 12 bar pressure tested and exclusive vitreous enamel coating
-
Environmentally sound and highly efficient thermal insulation
-
Compact design - slimmest available on the market (up to 200 litres)
-
All plumbing and electrical connections within a 90° angle
-
Magnesium anode to protect against corrosion
-
Heating element supplied with regulation thermostat and dual pole thermal cut-out
-
Cylinder thermostat with external regulation
-
Thermostats adjustable to 70°C
-
Unique coil design allows full quantity of water to be heated
-
Factory fitted 1/2" T&P relief valve
-
Unvented control kit supplied with cylinder at no additional cost
-
Simple installation
-
5 year tank guarantee (2 year guarantee on electrical components) |
|
Technical Data |
| Characteristics |
| Capacity |
l |
150 |
| Indirect coil rating |
kW |
26.7 |
| Coil surface area |
m² |
0,9 |
| Indirect reheat time (DT=50°C, primary circuit 80°C, 1 m³/h circulation) |
min |
22 |
| Voltage |
V |
240 single phase |
| Power |
kW |
3 |
| Immersion heater reheat time (DT = 50°C) |
min |
175 |
| Maximum Temperature |
°C |
70 |
| Heat loss 60°C |
kWh/24h |
2 .2 |
| Heigth |
mm |
1155 |
| Width |
mm |
505 |
| Depth |
mm |
505 |
| Installation type |
|
floor standing | |
Dimensions
Legend:
a - 790 mm
b - 915 mm
c - 1155 mm
d - 765 mm
e - 505 mm
g - 225 mm
For More Information Please Click on the PDF files beflow for help and for other helpful information
|
